Wires

Hastelloy Wires

Approx Price: Rs 1,500 / Kilogram 

Hastelloy c22, inconel 22, nicrofer 5621

Hastelloy c22 provides resistance to general corrosion, pitting, crevice corrosion, inter granular attack, and stress corrosion cracking. Inconel 22 can be used for many applications such as marine, power, chemical processing, pollution control, paper processing, and waste disposal industries. Hastelloy c22 contains chromium, molybdenum, tungsten, and iron which makes the alloy resistant to corrosion in stagnant or flowing seawater. The alloy is formed by gas tungsten-arc, gas metal-arc, and shielded metal-arc processes.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.


Chemical Analysis of Alloy c22 (UNS n06022)

Common Trade Names

Hastelloy c22, Inconel 22, Nicrofer 5621

cmnpssicrnimocucocb+tatialfewv
. 015 max. 50 max. 02 max. 02 max. 08 max20. 0 -22. 5rem12. 5 - 14. 52. 5 max2. 0 - 6. 02. 5 - 3. 5. 35 max

specifications
sheet/plateround barpipetubefittingsforgings
asme sb-575asme sb-574asme sb-622
asme sb-619
asme sb-775
asme sb-622
asme sb-516
asme sb-626
asme sb-366asme sb-564

Hastelloy c276, nickel vac hc-276, inconel c276, nicrofer 5716

Inconel c-276 is a nickel-molybdenum-chromium alloy with excellent corrosion resistance in severe environments. Inconel c-276 is used in pollution control, chemical processing, pulp and paper production, and waste treatment.

Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Inconel Wires

Approx Price: Rs 1,500 / Kilogram 
Minimum Order Quantity: 1 Kilogram

Wire manufactured (Hot rolling, cold drawning, annealing, redrawing, Hammering, Pressing, Rolling)
Diameter: minimum 0.03 mm-10 mm, 4 Gauge- 44Gauge, 0.002Inch-0.2Inch

Standards: ASTM B550

 

Inconel Wire

Inconel 718

Inconel X-750

Inconel 725

Inconel 722

Inconel 706

Inconel 617

Inconel 625

Inconel 601

Inconel 600

Monel 400 Wires

Approx Price: Rs 1,500 / Kilogram 
Minimum Order Quantity: 1 Kilogram
Monel 400 Wire is corrosion resisting, such as resistant to sea water and steam at high temperatures, resistant to salt and caustic solutions. Meanwhile, it exhibits characteristic like high strength.

Monel 400 Wire has low corrosion rate in flowing brackish or seawater while performing excellent resistance to stress-corrosion cracking in most freshwaters. This Wire's good resistance to a variety of corrosive conditions contributes to the wide application in marine and other non-oxidizing chloride solutions. Monel 400 Wire is particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated. However, its high copper content, make alloy 400 can be rapidly attacked by nitric acid and ammonia systems.
Monel 400 Wire also has good Adaptability to wide range of application temperature. It maintains good mechanical properties at subzero temperatures, as well as in temperatures up to 1000ºF, The melting point is 2370-2460ºF.

Monel 400 Wire's Manufacturer's advice:
Monel 400 Wire is immune to chloride ion stress corrosion cracking in typical environments. Besides, it is good corrosion resistant in reducing environments, but poor in oxidizing conditions. It is not useful in oxidizing acids, such as nitric acid and nitrous. Monel 400 Wire would be attacked in sulfur-bearing gases above approximately 700ºF and molten sulfur attacks the alloy at temperatures over approximately 500ºF. However, it is resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at normal and elevated temperatures. Monel 400 Wire offers about the same corrosion resistance as nickel but with higher maximum working pressures and temperatures and at a lower cost due to its superior ability to be machined.

Monel 400 Wire Applications:

Marine engineeringChemical and hydrocarbon processing equipment
Gasoline and freshwater tankCrude petroleum stills
De-aerating heatersBoiler feed water heaters and other heat exchangers
Industrial heat exchangersCrude oil distillation towers
Chlorinated solventsValves, pumps, shafts, fittings, and fastener

Monel Wires

Approx Price: Rs 1,500 / Kilogram 
Minimum Order Quantity: 1 Kilogram

Monel 400 Wire has great mechanical properties at subzero temperatures, can be used in temperatures up to 1000ºF, and its melting point is 2370-2460ºF. However, alloy 400 Wire is low in strength in the annealed condition, so a variety of tempers may be used to increase the strength.

Characteristics of Monel 400 Wire.

1. Resistant to seawater and steam at high temperatures
2. Excellent resistance to rapidly flowing brackish water or seawater
3. Excellent resistance to stress corrosion cracking in most fresh waters
4. Particularly resistant to hydrochloric and hydrofluoric acids when they are de-aerated
5. Offers some resistance to hydrochloric and sulfuric acids at modest temperatures and concentrations, but is seldom the material of choice for these acids
6. Excellent resistance to neutral and alkaline salt
7. Resistance to chloride induced stress corrosion cracking
8. Good mechanical properties from sub-zero temperatures up to 1020ºF
9. High resistance to alkalis

Stainless Steel Wire Rods

Approx Price: Rs 170 / Kilogram 
Minimum Order Quantity: 50 Kilogram
We offer a wide range of Stainless Steel Wire Rods which are manufactured in diverse diameters and length parameters. These steel round bars are manufactured from quality raw material and is available in various sizes and specifications.

Standard :

  • ASTM / ASME SA 276, ASTM / ASME SA 479 Grades : TP 304, 304L, 304H, 309S, 309H, 310S, 310H, 316, 316H, 316L, 316 TI, 317, 321, 321H, 347, 347 H, 410, 410, 420, 430, 431 & 444.

Titanium Wires

Approx Price: Rs 1,500 / Kilogram 
Minimum Order Quantity: 5 Kilogram
  • Specifications
  • Titanium wire is the softest titanium with the highest ductility, good cold formability which gives Titanium wire an excellent resistance from mild to high oxidization.
  • Available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.
  • Specifications International Specifications ASME SB-265 Round Bar/Wire ASME SB-348
  • ASTM F-67 Pipe ASME SB-337, ASME SB-338 Tube ASME SB-337, ASME SB-338 Fittings ASME SB-363 Forgings ASME SB-381.
  • SS Wires

    Approx Price: Rs 150 / Kilogram 
    Swagat Steel and alloys are offering high quality range of round bars and SS Wires that are have varied industrial applications. These wires and bars are fabricated from high quality material like steel, nickel alloy etc, that provide better durability to the manufactured range. Our clients find numerous applications in the construction industry as well as other commercial applications where strength reinforcement is necessary and forms a vital part of the construction where our bars and wired are used.We have a wide range which includes carbon steel wires, alloy steel wires, round carbon steel wires, round alloy steel wires and many more.

    Range :

    • 0.5 mm To 500 mm thick in 100 mm TO 6000 mm Length available with NACE MR 01-75.

    Other materials :

    • Cupro Nickel Bar
    • Copper (Electrolytic) Bar
    • Brass Bar
    • Aluminum Bar
    • Lead Bar
    • Phosphorus Bronze Bar
    • Gun Metal Bar
    • Reinforcing Steel Bar with Fusion Bonded Epoxy Coating.

    Other grade :

    • 17-4PH
    • 15.5 PH

    Wire material:

    • Nichrome Wire
    • Stainless Steel Wire
    • Monel Wire
    • Inconel Wire
    • Hastelloy Wire
    • Nickel Wire
    • Cupro Nickel Wire
    • Copper Wire
    • Brass Wire
    • Aluminum Wire
    • Kanthal Wire

    Finish:

    • Bright
    • Black
    • Polish

    Form :

    • Round
    • Square
    • Hex (A/F)
    • Bush
    • Rectangle
    • Flat
    • Wire Mesh

    Value added services:

    • Cutting
    • Rolling
    • Heat Treatment
    • Forging
    • Rolling

    Supply conditions :


    • Annealed/Solution Annealed.
    • Hardened & Tempered.
    • Strain Hardened.
    • Centerless Ground.
    • Centerless Ground & Polished.
    • Cold Drawn.
    • SmoothTurned & Polished.
    • Forged & Peeled
    • Buffed (Mirror finish).
    • 100% Ultrasonically tested.

    Test certificate :

    • Mill Test Certificate as per EN 10204 / 3.1B
    Looking for Wires ?
    © Swagat Steel & Alloy
     
    Desktop Site Back to top